Hyppe Infinity 50K User Guide: Setup Instructions, Airflow Adjustments & Charging Guide
If you just picked up the Hyppe Infinity 50K, you’re holding one of the most feature-packed high-capacity disposables on the market. With a 360-degree screen, adjustable power modes, Ice Control, and a rechargeable battery, it goes far beyond the “open and puff” simplicity most disposable users expect.
This complete Hyppe Infinity 50K User Guide walks you through setup, airflow behavior, charging, battery management, and long-term care tips—so you can get the most performance and consistency out of your device.
What Is the Hyppe Infinity 50K?
The Hyppe Infinity 50K is a rechargeable, draw-activated disposable vape pre-filled with 12mL of 5% nicotine salt e-liquid. It features:
- Up to 50,000 puffs in Normal Mode
- Up to 35,000 puffs in Boost Mode
- 360-degree OLED screen display
- Adjustable Ice Control
- USB-C charging
Unlike basic disposables, this device gives you control over intensity, cooling, and performance—making it ideal for users who want customization without switching to a full mod setup.
Unboxing & Initial Setup Instructions
Step 1: Remove Packaging & Seals
Take the device out of the box and remove any protective plastic wrap. Check the mouthpiece for rubber stoppers or silicone plugs and remove them completely before use.
Step 2: Inspect the Device
Before your first puff, look at the 360-degree screen. Some units may display battery level immediately; others activate once you take your first inhale.
Step 3: Draw to Activate
The device is fully draw-activated. There are no firing buttons. Simply inhale from the mouthpiece to begin vaping.
There is no priming process required. Since the Hyppe Infinity 50K comes pre-filled and pre-saturated, it’s ready to use out of the box.
Understanding Power Modes: Normal vs Boost
One of the biggest upgrades in this device is adjustable output. On the bottom of the unit, you’ll find a toggle switch that lets you choose between two power levels.
Normal Mode (Up to 50,000 Puffs)
- Smoother, more relaxed draw
- Longer overall lifespan
- Balanced vapor production
Normal Mode is ideal for all-day use. It conserves battery and e-liquid, allowing you to get closer to the maximum puff count.
Boost Mode (Up to 35,000 Puffs)
- Higher heat output
- Stronger flavor intensity
- Slightly more restricted hit
Boost Mode increases power to the coil, delivering warmer vapor and more pronounced flavor. Because it consumes more liquid and battery per puff, total lifespan is reduced compared to Normal Mode.
If you prefer bold hits or denser vapor, Boost Mode will feel noticeably stronger.
How Ice Control Works
The Hyppe Infinity 50K features adjustable Ice Control, which allows you to toggle menthol intensity on or off.
How to Adjust Ice Mode
Use the designated Ice Control button to turn the cooling effect on or off. When activated, the menthol chamber enhances the cooling sensation.
Important: The menthol and main flavor are stored in separate chambers; one may deplete slightly faster than the other. This is normal.
When to Use Ice Mode
- Turn it on for sharper, colder hits
- Turn it off for smoother, flavor-forward draws
This flexibility lets you adjust the feel of your vape without changing devices.
Airflow Behavior & Draw Style
While the device does not include a traditional sliding airflow ring, airflow is influenced by power mode and internal design.
Normal Mode Airflow
Provides a looser draw with smoother airflow. Ideal for users who prefer longer, relaxed inhales.
Boost Mode Airflow
Creates a slightly tighter, more intense draw. Vapor feels warmer and more concentrated.
The internal airflow system is tuned to work with the Ice Control and power settings, meaning your experience changes depending on how you configure the device.
How to Read the 360-Degree Screen
The 360-degree OLED display wraps around the device, offering real-time data from multiple angles.
What the Screen Displays
- Battery percentage
- E-liquid level indicator
- Active power mode (Normal/Boost)
- Charging status
This eliminates guesswork. Instead of wondering when your vape might die, you can monitor battery and liquid levels at a glance.
Charging Guide: Step-by-Step
Charging Port
The device uses a USB-C charging port located at the bottom.
Charging Cable
A USB-C cable is typically not included in the box, so you’ll need to use one you already own.
How to Charge
- Plug your USB-C cable into the device.
- Connect the other end to a wall adapter or USB port.
- The 360-degree screen will indicate charging status.
Battery Management Tips
- Recharge when battery drops below 20%
- Avoid letting it fully drain repeatedly
- Unplug once fully charged
- Do not leave charging unattended
Following these steps helps extend battery performance throughout the device’s lifespan.
Maximizing Puff Count & Longevity
To get closer to the advertised 50,000 puffs:
- Use Normal Mode for daily vaping
- Take steady, moderate-length puffs
- Avoid chain vaping back-to-back
- Keep Ice Mode off if you don’t need cooling
Remember: The 50,000-puff count is an estimate based on short puffs in Normal Mode. Boost Mode reduces expected lifespan to approximately 35,000 puffs.
When Is It Time to Dispose of the Device?
You’ll know it’s finished when:
- The e-liquid indicator shows empty
- The device stops producing vapor
- The flavor tastes burnt even after charging
Dispose of the device responsibly. Because it contains a rechargeable battery, check local electronic waste guidelines rather than throwing it directly into general trash when possible.
Common Troubleshooting Questions
Why isn’t my device hitting?
Check battery level on the screen. If low, charge fully. Also ensure no debris is blocking airflow.
Why does flavor taste weak?
Switch to Boost Mode or activate Ice Control for stronger sensation. If liquid level is low, it may be nearing the end of its lifespan.
Why is vapor production inconsistent?
Avoid chain vaping. Give the coil a few seconds between puffs to re-saturate.
Real Customer Reviews
Marcus T. – “The screen makes a huge difference. I always know when to charge it. Boost Mode hits harder than most disposables I’ve tried.”
Danielle R. – “Ice Control is my favorite feature. I can switch between smooth and icy depending on my mood.”
James L. – “Battery life is impressive. Charging is quick, and it lasts way longer than smaller disposables.”
Many users appreciate the balance between customization and convenience. The ability to toggle modes and cooling makes it feel closer to a pod system while keeping disposable simplicity.
Final Thoughts
The Hyppe Infinity 50K stands out because it combines disposable convenience with advanced customization. Adjustable power, Ice Control, a full battery display, and USB-C charging give users more control than traditional disposables.
By understanding how to use each feature properly, you can extend performance, maintain consistent flavor, and tailor each session to your preference. Whether you stick to Normal Mode for longevity or switch to Boost for intensity, knowing how your device works makes all the difference.
Frequently Asked Questions
How long does the Hyppe Infinity 50K last?
In Normal Mode, it can reach up to 50,000 puffs depending on usage habits. Boost Mode reduces that to around 35,000 puffs.
Does it have adjustable airflow?
It does not include a manual airflow slider, but airflow feel changes depending on power mode selection.
How do I know when to recharge?
The 360-degree screen shows battery percentage. Charging is recommended when it falls below 10–20%.
Can I refill the device?
No. It is a pre-filled disposable device and is not designed to be refilled.